Talent Recruitment-Shixinghong Precision Machinery Equipment Co., Ltd

Looking for domestic and foreign Agents！

Shenzhen famous brand

Guangdong Province Famous Brand Products

National high-tech enterprise

Guangdong Green Factory

Guangdong High-end CNC Machine Tool Engineering Technology Research Center

Hotline：

400-138-3388

0755-88881850

Home page

Talent Recruitment

After-sales service (1)

Job responsibilities:
1. On-site installation and commissioning of equipment;
2, responsible for customer site machine fault diagnosis, maintenance, elimination;
3, by providing quality after-sales service, enhance customer satisfaction with the brand and products;

Job requirements:
1, with CNC machine tool after-sales service related work experience;
2, have the relevant skills needed for maintenance equipment, independent analysis and problem solving ability;
3. Understand the structure of CNC machine tool, familiar with the mechanical principle and electrical system of CNC machine tool;
4, work seriously, responsible and active, can adapt to irregular business trips;

Salary: negotiable

Work place: Guangming District, Shenzhen

Contact: 18813932130 Mr. Zhang

CNC lathe production supervisor (1)

Job responsibilities:
1. Organize production according to production plan, complete production tasks with quality and quantity as planned;
2, responsible for research and improvement of production and assembly process, at any time to improve production efficiency and quality;
3, responsible for finishing and improving the BOM table of each type of CNC lathe;
4, responsible for training the basic skills of subordinates, building a team, responsible for workshop 7S management;

Job requirements:
1, age 30-50 years old, secondary school or above, more than 5 years of CNC lathe production and assembly experience, more than 2 years of management experience;
2, have certain experience in the production and assembly and debugging of turning and milling composite machine tools;
3, familiar with the new generation system;
4, the power tower, hydraulic tail seat debugging has rich experience;

Salary: negotiable

Work place: Zhongtang Town, Dongguan City

Contact: 18018745569 Miss Li

CNC machine tool assembly fitter (1) ‌

Job responsibilities:
1, according to the workshop supervisor requirements to complete the production task on time and quantity, can work overtime according to the production requirements and be responsible for the assembly quality of products;
2, can independently complete the assembly of machine tools and simple debugging according to the assembly drawings;
3, obey the orders, follow the command, strictly abide by the company's rules and regulations and relevant provisions;

Job requirements:
1, 2 years of relevant experience, familiar with assembly process and quality requirements;
2, good health, work hard, can bear hardships and stand hard work, have team spirit;

Salary: negotiable

Work place: Zhongtang Town, Dongguan City

Contact: 18018745569 Miss Li